Cerober1

How hard is it to fab out arms and linkages. I am fairly new to fab work most extensive I've done are a hand full of prerunner cages (not score approved) and bumpers. Also what materials am I going to use.
I am pretty sure I want to use Dom tubing but what diameter and thickness also is there a company to buy threaded bungs and heims you prefer.

dev_daddy

I am in the process of building me some long arms. I use 2 inch DOM with .250 inch wall. And I used some rubber rod ends from teraflex.

96_xj

contact Dan at ruffstuff.

best guy to talk to and awesome Prices.

DOM 2"x0.250" lowers MIN, I would even go as far as 2"x0.375" and uppers you can get away with 1.5"x0.188 but I would go 1.5"x0.250"

steering

1.5"x0.250" or 1.25"x0.250" would be recommended.

xjmarc

x2 what 96 said. I'm running Dan's heims on my steering and used 1.5x.250 wall DOM for my steering. Unless it's offroad only I wouldn't run heims on both ends of suspension links because it will be a harsh ride. You can run heims on one end and rubber bushings on the other. Jonny joints also work great for link ends and are rebuildable.

sandaddik2

2x.250 lcas and 1.75x.188 upper arms,
1.25 heims for lcas and upper links use 7/8s heims
get them from dan at ruffstuff

tie rod use 1.5x.250 do not use .120 wall i used .120 wall and first rock i came down on i said goodbye to that it gave me about 8 inches toe in.... lol
also if you do an otk set up your going to have to get rid of your sway bar links.

Cerober1

Ok cool thanks for the input guys I'm going to give it a try.

What is the steering setup called when the tierod go from knuckle to knuckle and the drag link connect at the knuckle? Is this the best setup to run?