Fab bumper question
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Pennsylvania
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Fab bumper question
So, I am fabbing my own bumper, which I am doing without a bender, which is fine, wont be as "pretty", but who cares, it'll be effective. My question is, what is the average price payed by other fabbers for 2 1/2 or 3 inch tubing? that an 1 1/2 or 2 inch tuning? I am not sure which set if 2 I'll be using, either 3 and 2 ot 2 1/2 and 1 1/2, but I am trying to figure out how much I will be paying. I'm looking tomorrow, but I am anxious... lol
#2
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Pennsylvania
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
Well, I got my answer today. I decided, after seeing in person the tubing, that I am going with 1 1/2 and 2 inch tubing, schedule 40.
The 1 1/2 schedule 40 is 2.60/ ft and the 2 inch schedule 40 is 3.40/ foot.
Those prices are good, considering I won't need that much, then the flats and home made winch place should be pretty easy... Hope this helps someone else looking
The 1 1/2 schedule 40 is 2.60/ ft and the 2 inch schedule 40 is 3.40/ foot.
Those prices are good, considering I won't need that much, then the flats and home made winch place should be pretty easy... Hope this helps someone else looking
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)