Cherokee Chat General non-tech Cherokee chat
XJ/MJ/ZJ/WJ
Sponsored by:
Sponsored by: DashLynx

Engine grounds

Thread Tools
 
Search this Thread
 
Old 03-27-2010, 10:31 PM
  #1  
Junior Member
Thread Starter
 
chip's Avatar
 
Join Date: Apr 2009
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default Engine grounds

On the right side of the block right below the head about 6" back from the distributor, there is a ground post. There are 3 wires grounded to this post, (black with tan stripe, black with white stripe and black with orange stripe). Does anyone know exactly what each individual wire is for? Only 1 out of the 3 were hooked up on my 95 4.0 auto.
Old 03-27-2010, 10:35 PM
  #2  
Senior Member
 
89cherokeelimited's Avatar
 
Join Date: Jun 2009
Location: Hendersonville, TN
Posts: 706
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0 litre
Default

What are the specs on your jeep? motor, model, year
Old 03-28-2010, 03:20 AM
  #3  
Junior Member
Thread Starter
 
chip's Avatar
 
Join Date: Apr 2009
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

95 XJ, 4 litre I-6, auto with a/c, 4-X. It's a plain jane cherokee. No gauges or tac, only idiot lights in dash, manual windows, locks etc.
Old 03-28-2010, 07:04 AM
  #4  
Caracticus Potts The Mod
 
Willys55's Avatar
 
Join Date: Jul 2009
Location: Hainsville, NJ
Posts: 5,298
Received 9 Likes on 8 Posts
Model: Grand Cherokee
Cool

black/tan and black/white are the ignition grounds(sparks and injector pulse. The other one ,black/orange is trans related. This is a shared ground , but these wires are also spliced and ground on two other places, back of the intake and the body on the driver and passenger side.
Old 03-28-2010, 11:17 AM
  #5  
Junior Member
Thread Starter
 
chip's Avatar
 
Join Date: Apr 2009
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Thanks. The black/white and black/orange never were hooked up on my cherokee. It's been running fine for many miles and just recently I'm having an engine miss/cutout while driving that has me stumped. I used a jumper wire to ground the 2 exposed leads straight to the battery and this didn't seem to cure my problem. Now every once in a while it will just die at idle and will start right back up again. I'm wondering if hooking them up had anything to do with it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
01-31-2024 04:58 PM
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
03-17-2021 07:41 PM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
Gauge
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-05-2015 11:02 PM
cbowl
Cherokee Chat
1
09-04-2015 01:56 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Engine grounds



All times are GMT -5. The time now is 03:17 PM.