This is my plan trying to sell the electric fan conversion. It will repalce the mech and the stock electric fan with 3x10" electric fan 1550 cfm each.
The installation is very simple the new fan shroud will drop right in the stock lower fan shroud support and the top will have 2 bracket mount to the radiator support, it also required minor trim the stock radiator support. The 1st fan will turn on once the engine is running, the second one will come on with the stock sensor and the thrid one will come on with the addtional control switch or you can customized any configuration that work for you. Please let me know what you think.

 

Your ability to sell this will seriously depend on how easy it is to wire. If all you've gotta do is run 2 wires and connect a plug to the stock fan location it would be a good seller I bet...of course the price has to be right too

 

Very nice. Yes, installation and price play a big factor.

 

Not a fabrication topic, moved to Cherokee Chat.

-Nuk

 

The standard installation is pretty simple. 2 fans wired together and will connect to ignition wire at the distribution box, the other fan will connect the stock electric fan plug. So 2 fans always on when the engine is running and the other fan will be on when the AC turn on or the temp reach 220 F (whatever stock temp setting).
I will do more some testing on the Socalfest event and see how good this setup will be. I will post the price once I got the result from the test.

 

What would you be charging for this, ballpark?

 

X2!