Does it ever end?????
#16
CF Veteran
Join Date: Oct 2010
Location: Ontario, Canada
Posts: 2,150
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
It never ends. I've had a few reoccurring repairs as of late.
I'm sure the November deer at 95kph didn't help the radiator, that's the second one I've installed, you'd think they could stand up to a little flex.
Then the water pump was done. The fuel tank and sending unit is this week end.
Gonna need fresh tires for the summer. Did the broken axle swap at Christmas and all the brakes, again at new years. Last fall was the axle and rear driveshaft universals. The rear bearings last summer and the front driveshaft last summer. It never ends. You know I checked my maintenance book and I can see the unit bearings up front must be coming due, no current growl but seems just yesterday I replaced all this stuff, just about 350000km ago! I'll probably have to replace it all again just before we roll onto a million clics. It never ends.
I'm sure the November deer at 95kph didn't help the radiator, that's the second one I've installed, you'd think they could stand up to a little flex.
Then the water pump was done. The fuel tank and sending unit is this week end.
Gonna need fresh tires for the summer. Did the broken axle swap at Christmas and all the brakes, again at new years. Last fall was the axle and rear driveshaft universals. The rear bearings last summer and the front driveshaft last summer. It never ends. You know I checked my maintenance book and I can see the unit bearings up front must be coming due, no current growl but seems just yesterday I replaced all this stuff, just about 350000km ago! I'll probably have to replace it all again just before we roll onto a million clics. It never ends.
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)