conduit build question
#1
Member
Thread Starter
Join Date: Aug 2011
Location: Burbs of detroit
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
conduit build question
If bending 3/4" emt conduit, how far down the pipe do I set the mark to set the bend.
I am taking 10' pieces and cutting them at 6' for the sides and using the 4' pieces for the frt and back cross rails.
So how far down the 6' pieces to I go to start the bend
Thanks
Rich
I am taking 10' pieces and cutting them at 6' for the sides and using the 4' pieces for the frt and back cross rails.
So how far down the 6' pieces to I go to start the bend
Thanks
Rich
#3
Member
Thread Starter
Join Date: Aug 2011
Location: Burbs of detroit
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
#4
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
i built mine out of conduit too and used the lowes conduit bender. all i did was just read the instructions on there. im sure if you google it the answer will pop up somewhere too.
#5
Member
Thread Starter
Join Date: Aug 2011
Location: Burbs of detroit
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Thanks for the input
#6
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
not all of mine was perfect but its just conduit. didnt take but a little tweaking to get them "twisted" straight to line up. even with them a little messed up your going to have the parts that connect the bottom to the top will hold them back into place. its just conduit not DOM. but i also welded mine together too. i too looked at them prebent ones but adds up for trying to make a cheap roof rack.
Trending Topics
#8
Member
Thread Starter
Join Date: Aug 2011
Location: Burbs of detroit
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
#9
Member
Join Date: Jun 2011
Location: Winsted ct.
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
i built one using 3/4" 6'x4' i think it was 3" or 3 1/2" but not sure i cant remember.i screwed up the first one.so really im no help.
#11
CF Veteran
From where you want the bend to end: 5" extra for 1/2, EMT 6" for 3/4. It won'tbe terrible getting the bend to line up correctly, though I highly suggest a little torpedo level, a square, and working on a durable level floor. I hate conduit bending lol (apprentice electrician.)
Last edited by Dan91; 10-09-2011 at 09:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
19
09-25-2015 02:37 PM
mach3lude
Modified XJ Cherokee Tech
17
09-10-2015 02:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)