BW cut outs- Need help on install
Senior Member
Joined: Sep 2011
Posts: 554
Likes: 0
Year: 1998
Model: Cherokee
Engine: 4.0
Thank you... All the I've seen shows them meeting at the door. For some reason when I go to line mine up the piece on the door wants to fall about an inch and half onto the rear quarter... But I was already trimmed and folded before doing this. So I don't have my fenders cut the exact way they call for In the instructions maybe that's it idk..
Also for the front.. Being mines a 00 I had to cut down two of the screws bc they would have went into the washer resovoir... I want to just put nuts and bolts I'd feel more. Comfortable with that. They tell you to drill like a 3/16 hole and that's way too big for the hardware given imo
Also for the front.. Being mines a 00 I had to cut down two of the screws bc they would have went into the washer resovoir... I want to just put nuts and bolts I'd feel more. Comfortable with that. They tell you to drill like a 3/16 hole and that's way too big for the hardware given imo
Thread Starter
CF Veteran
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
Got them on! Thanks got the help!
Two of the screws on the flares that attaches to the door need to be cut down a tad bc they are too long.. But other than that were golden!
Two of the screws on the flares that attaches to the door need to be cut down a tad bc they are too long.. But other than that were golden!
Senior Member
Joined: Oct 2010
Posts: 503
Likes: 1
From: pennsylvania
Year: 1996
Model: Cherokee
Engine: i6
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 8, 2015 06:28 AM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 5, 2015 06:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)