Bumper mounts?
#1
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Southern oregon
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 89 4.0l swap
Bumper mounts?
So, im building tube bumpers front and back....any suggestions/pictures of how to mount them into the frame?
#4
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Southern oregon
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 89 4.0l swap
Originally Posted by EVILXJ
Alot of companies make them. I found these on ebay
#7
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Southern oregon
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 89 4.0l swap
Originally Posted by brookhart63
Mounted to the rear? The rear has a completely different mounting system. Those are for the front. And make your own out of scrap. Free and easy
Trending Topics
#8
Newbie
Join Date: Mar 2011
Location: Toledo, Ohio
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
Rear Bumper Mounts
I'm actually in the process of finishing up a rear bumper project on my 98 right now. I cut out some sheet from the tail panel between the stock mounts. This allowed me to use some 1/4" wall 2x4 tubing (with some alterations) tied from the inside of the frame rails. I opened up some stock holes to fit 5/8-11 bolts thru. Then I weld the mounts to the bumper after measuring and mock up. I'll post some pics when I finish the structural procedures tomorrow. I got the idea from another project on this forum I believe (not taking full credit).
#11
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Southern oregon
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 89 4.0l swap
Originally Posted by KHarry
I'm actually in the process of finishing up a rear bumper project on my 98 right now. I cut out some sheet from the tail panel between the stock mounts. This allowed me to use some 1/4" wall 2x4 tubing (with some alterations) tied from the inside of the frame rails. I opened up some stock holes to fit 5/8-11 bolts thru. Then I weld the mounts to the bumper after measuring and mock up. I'll post some pics when I finish the structural procedures tomorrow. I got the idea from another project on this forum I believe (not taking full credit).
#13
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Southern oregon
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 89 4.0l swap
#14
CF Veteran