i plan on just building the mounting bracket, would a plasma cutter be the best tool for the job? or what would you recommend?

 

Do you own a plasma cutter? Cut it with a 4 1/2 grinder with a cutting wheel if not. If you have never used one, I guarantee that it takes some practice.

 

I would LOVE to have a plasma cutter. I have used a sawsall, a variable speed jigsaw, an air grinder with a cut off wheel and an angle grinder. I have even used a dremel once in a pinch.

 

I used a 4 1/2 grinder with cut off wheel to build my whole bumper.ive used a plasma cutter before and my cuts were so jagged id have to use the grinder to clean them up.But I don't have enough time using one to make clean cuts.I personaly rather use a a cutoff wheel.

 

i do have one,and i think ill use it

 

Get a standoff guide wheel for the plasma and your cuts will be 1000x better