Bad tcase
08-12-2011, 10:57 PM
#1
Seasoned Member
Thread Starter
Join Date: May 2011
Location: vancouver,wa
Posts: 250
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: H.O. 4.O
Bad tcase
My transfercase broke a chain today..i found one with 150,000 miles and a sye already installed out of a 92 rolled xj for $400 is this a decent deal ...other than being rolled the jeep was very clean
The following users liked this post:
Helpinghand (02-16-2024)
The following users liked this post:
Helpinghand (02-16-2024)
08-13-2011, 02:09 PM
#6
Senior Member
Join Date: Jan 2008
Location: Cheyenne Wyoming
Posts: 578
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0l
I agree, I would try and get it knocked down to the $300. Having a SYE already installed just doesn't seem like justification for extra cost to me. Seems like when I was looking around thinking I might need one I was around $200 to pull one myself.
08-13-2011, 04:16 PM
#7
Member
Join Date: Jul 2011
Location: Colorado
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L High Output
exactly! if you need it now see if you can talk him down a bit 300, 350 better then 400. But if in a pickle not to bad have you tried craigslist at all?
Trending Topics
08-13-2011, 04:25 PM
#9
Member
Join Date: Jul 2011
Location: Colorado
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L High Output
$150 ??? What's wrong with it. That's too cheap IMHO. What you could always do is go to your local junkyard and just pull a t-case out of a cherokee. Check internals before buying. Cost you pretty cheap. SYE needed for 6.5+ lift. I run 5" on a slip yoke. No issues at full flex.
If anything the $400 looking the best if you don't wanna unbolt one from junkyard.
If anything the $400 looking the best if you don't wanna unbolt one from junkyard.
08-13-2011, 04:50 PM
#10
Seasoned Member
Thread Starter
Join Date: May 2011
Location: vancouver,wa
Posts: 250
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: H.O. 4.O
150 case had 300,000 miles on it at least thats what he said when I called...im up to 6.5 inches and already set up for elimanater
08-13-2011, 04:58 PM
#11
Member
Join Date: Jul 2011
Location: Colorado
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L High Output
Nice!!! that's what I'll be going to next 
Then I'd say get the $400 one thats set up ready, see if ya can talk him down but looks like best bet.
Then I'd say get the $400 one thats set up ready, see if ya can talk him down but looks like best bet.
08-13-2011, 07:19 PM
#14
Member
Join Date: Jul 2011
Location: Colorado
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L High Output
Should be a direct swap, the only thing you have to look for is the spline count. If it's an AX-15 its 23 spline count, if its the AX-5 its a 21 spline count. Match spline count your splines if same then it should go in no problem
Last edited by Xj4lyfe; 08-13-2011 at 07:22 PM.