Those wheels have 5.5" backspacing.

Around 4" is a good number.

 

4.25" front and 4.5" rear.
15x10 with 3.75"bs. 33x12.50 duratracs. trimed.

 

3 inch lift with added coil spacers and shackles

I would say around 4.5 inches with spring sag.

32 11.50 Super swamper SSR's

Granted 2 of my tires have holes in the sides you can put your head in haha.

With 3 Inch only (before spacers and shackles)





After Spacers and Shackles

 

so if my rims do in fact have a 5.5" backspacing will a 33x12.5 work or would I need spacers or something

 

my stock rims with 31's rubbed my LCA, so I'm think yes you'll need 2" spacers. my new wheels are 3.25 back spacing, no rubbing

 

My 31's rubbed the LCA as well. I threw some 2" spacers on then they rubbed the bumper end caps until I trimmed them. So pick your poison I guess.

 

I have 4.5" RE LCA's.

 

instead of doing backspacing could I run a 33x11.5 tire? right now I'm running 31x10.5

 

Only 33 11.5 tires they make are metric 285 75 16. Better bet is 33 10.5 15

 

I'm in the process of doing a 3.5 inch lift to accommodate some 33's.

 

if I can find a 11.50 wide I'm not just talking about 33" just any size will an 11.50 wide work?

 

Your only option will be a 32x11.50 they are a size that is getting rare not to mention priced very close to a 33x10.50

 

yeah I have it narrowed down to either getting a 33x10.50 or a 32x11.50...which would u guys do lol

 

32. skinny 33 looks weird.. lol. and the width is going give you more bite, than a 1" in height

 

that's what I was thinking too I really want 33 but that **** will look soo skinny will 11.50 rub tho? I have 5.5 backspacing