Angry eyes head lights How to?
06-24-2011, 11:50 AM
#16
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
Maybe they could get you for modifying your OEM equipment, but I don't think there are any rules saying you must have a certain shape headlight.
Just speculation though.
Also, as stated above...its pretty effin easy to remove the modification.
Just speculation though.
Also, as stated above...its pretty effin easy to remove the modification.
06-24-2011, 01:03 PM
#17
CF Veteran
Join Date: Sep 2010
Location: Warsaw, IN
Posts: 2,844
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
I like the pattern i get a solid beam line.. but the company sent me two of the same.. not one left and one right.. i have two rights which dont make a left..
i upgraded the wire harness to the HD harness, and upgraded the pos and neg battery cables to 0-1 gauge.. add that with an optima red top.. i get good light output with cheapo h4s.
i upgraded the wire harness to the HD harness, and upgraded the pos and neg battery cables to 0-1 gauge.. add that with an optima red top.. i get good light output with cheapo h4s.
I just threw mine in and they blow. I think one might be shot now since the front end took a little swim but I haven't checked yet.
06-24-2011, 01:47 PM
#18
CF Veteran
Thread Starter
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
thank you for the replies... I want thinking of using some kind of decal.... i really do not want to use paint on my glass h4's let here some other ideas...
06-24-2011, 02:23 PM
#19
CF Veteran
Join Date: Oct 2010
Location: York PA/State College PA
Posts: 2,412
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by The Rooster
thank you for the replies... I want thinking of using some kind of decal.... i really do not want to use paint on my glass h4's let here some other ideas...
06-24-2011, 03:32 PM
#20
Former Sponsor
Join Date: May 2010
Location: meriden Ct
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Actually honestyly, I used regular paint on the first coat, ran out then used the high temp to finish. Its been a few months, and I dont even have chips. and I wheel it every weekend. no problem, also dont notice any difference in light output. I also kept it high and minimal to make sure it stayed that way
06-24-2011, 03:47 PM
#21
CF Veteran
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
I actually did use high temp paint. I work second shift so I drive home 40 minuted every night obviously with my lights on. I have had no problem.
Actually honestyly, I used regular paint on the first coat, ran out then used the high temp to finish. Its been a few months, and I dont even have chips. and I wheel it every weekend. no problem, also dont notice any difference in light output. I also kept it high and minimal to make sure it stayed that way
Actually honestyly, I used regular paint on the first coat, ran out then used the high temp to finish. Its been a few months, and I dont even have chips. and I wheel it every weekend. no problem, also dont notice any difference in light output. I also kept it high and minimal to make sure it stayed that way
06-24-2011, 03:50 PM
#22
Senior Member
Join Date: Mar 2010
Location: Miami,Fl
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L6 Srt
i used vht roll bar/chassis paint.. no chips or fading.. no difference in visible light at night.
I didnt scuff the area before paint and it holding up well.. i will though be redoing the eyes do change it up a bit.
I didnt scuff the area before paint and it holding up well.. i will though be redoing the eyes do change it up a bit.
06-24-2011, 04:28 PM
#23
Former Sponsor
Join Date: May 2010
Location: meriden Ct
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I did no scuffing either. diddnt want to have them sanded down if I wanted to get rid of it. so far so good. even if it does chip, its nice and easy touch up
06-24-2011, 07:44 PM
#26
CF Veteran
Join Date: Jan 2010
Location: Albuquerque
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
if you just want to play angry eyes for a few days and your not sure if you will like how it looks and would rather not go all in with painting them you can always get some vinel tape or electrical tape and tape it off and then see how it looks before painting
06-24-2011, 09:10 PM
#27
Senior Member
Join Date: Jun 2011
Location: Brookfield, WI
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.2L bored out 4.0L I6
even to the degree that i have mine at doesn't effect the light output at all. its very easy, and if the police in your area are dicks you can just only use electrical tape and take it off if they threatening for a ticket, another pic;
06-24-2011, 09:13 PM
#28
Senior Member
Join Date: Jun 2011
Location: Brookfield, WI
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.2L bored out 4.0L I6
wait till tomarrow so we can do it together, cuz i have to re-do mine too!
06-24-2011, 09:29 PM
#29
Senior Member
Join Date: Dec 2010
Location: Southern Utah
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 I-6
Just go buy some black vinyl and bam you're ready. its probably easier to do it with the main bezel off so you can get around the bulb and it looks better when you paint the chrome trim ring black also.
