adding to a Rusty's 3 inch coils and springs?
#1
Newbie
Thread Starter
Join Date: Jul 2015
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
adding to a Rusty's 3 inch coils and springs?
I have a 01 XJ with a Rusty's 3 inch coils and full leafs with 30's and 1 inch transfer drop. looking to do budget lift to 4.5 or 5 inch. I only hit Silver Lake Sand dunes a few times a year.I was going to do shackles, coil extensions lower ca's and adj track bar and 33's. good enough?
Last edited by Cherokeescott; 07-11-2015 at 10:17 PM.
#3
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Don't know where to start but I did the exact same thing using the same Rustys 3" lift and went to 4 1/2".
I run 33' tires also so 4.56 gears are required and lockers at the same time saves a lot of labor. Then you will need Adj U/LCA's, SYE, Driveshaft, Shocks, Brake lines, correct wheels, fender trimming, at least a ZJ V-8 tie rod setup, Boomerang Shackles, Adj Coil spacers and so on.
That extra 1 1/2" cost me about $4.5k done right.
I run 33' tires also so 4.56 gears are required and lockers at the same time saves a lot of labor. Then you will need Adj U/LCA's, SYE, Driveshaft, Shocks, Brake lines, correct wheels, fender trimming, at least a ZJ V-8 tie rod setup, Boomerang Shackles, Adj Coil spacers and so on.
That extra 1 1/2" cost me about $4.5k done right.
Thread
Thread Starter
Forum
Replies
Last Post
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-28-2020 05:48 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)