Ok I have a 3 inch lift on my ch now it has the springs in the front and lift blocks on the rear .. I want to go another 3 inch and I want to go with coil spacers on the front and rear leaf shackels... but I was woundering id I would have to have a new drop pitman arm or what else I would have to do if anything please help me out thanks

 

Biggest shackle made is a 2"

 

Ok what would u do

 

Get rid of the blocks and get lift springs. It'll ride better and it's easier on your driveline.

 

Ok if I get a total of six inches will I need a diff pitman arm or other parts

 

For that height Youll need a transfer case drop at least. An sye would be better. An adjustable track bar. Longer brake hoses up front and out back. Shocks. Just to name a few.

 

I'd just setting for 5" or get a full leaf pack. At 6" you'll need new trac bar, see, it'd b good to get long arms, transfer case, and brake lines. U should have gotten a full lift at first. So now all u would have to do is throw a spacer up front and a shackle in back.

 

What's the biggest tire u can run with a 5 inch lift

 

Depends on how much you're willing to trim and bumpstopping. People clear 35s with 3-4". Just because you can clear them doesn't mean you should run them.

 

I was think 31s

 

31s will fit with 2" and no trimming but it's tight.

 

What year is yours?

 

31s on ten inches of lift? I'm calling BS.

 

31 s on 3 to 5 inch of lift!

 

Lol where did u get 10" lift? 31s look great on 4" lift. If u go 5 or 6 I'd to 32-33s