Just look around on the forum for a mod and they will gladly move it.

 

Makes perfect sense, I'm an absolute pita at Diesel Bombers. Gee Oh Dee is one mod you can search that moves threads around a lot.

 

So I dont know if this really counts as "Building", but one of the Jeeps break lines started leaking really bad a few days back. I didnt realise, and thought the break light being on was a glitch as I thought it only indicated the parking break. It turns out that it also indicates when there is no preassure in the system.

Long story short I had to replace the break line, and got it all done only to break off the purge valve while bleading the breaks. So after all that work it got towed to the shop anyway since I dont have the experience or tools to drill out the broken valve.

Here is a picture of the old rusted break line. Who knows maybe this year I will have the money to Build the Jeep some.

Attachment 90951

 

So this Friday I have plans to spray in a liner. I am a little concerened with the amount of rust I may find. Below is a picture of the liner I will be using. Hopefully it will do the trick.

 

Bad choice.... That's the worst kind on the market. Look into rustolium bed coat

 

Thanks for the advice. I will return the other spray on liner tomorrow. I may wait a while to buy the herculiner gun and material. How much do you think it will take should I buy the gallon when I get around to it?

Here is the smaller portion:
http://www.oreillyauto.com/site/c/de...1832&ppt=C0339

Larger:
http://www.oreillyauto.com/site/c/de...1832&ppt=C0339

Oh and Im putting this on hold to get the annoying squek fixed!

 

I've heard a gallon will do 2-3 good coats

 

The squek is fixed turned out to be the belt. Next up on the list is to replace the drivers door speaker and check the wiring since sometimes the power locks dont work and the speaker shorts out.

Anyone have 97 cherokee wiring diagram?

 

Just got it washed, and now I can see how bad the paint on the hood is

Attachment 107944

 

The paint on my hood is shot too. It seams common with black paint.

 

I know this is long overdo, but here is an update. Life seems to be slowing me down in getting the things done to the jeep I would like to get done.

Attachment 113635

Attachment 113636

That being said I was able to get the CB installed I have had on my todo list for 2 years. Here is the CB, and if you look back further you can see the anenna.

 

I almost forgot pulling back the edge of the left hand side of the passanger floorboard carpet I found a line of rust 1 inch by 4 inches. Im going to need to address the rust, but wonder how much it would cost.

Anyone know about how much replacing rusted floor boards costs, and what places do that kind of work.

 

http://www.northridge4x4.com/shop/ro...-plate-rh1015a

Anyone know if this is worth it, or if theres a better option out there? My current bumper is dented and the trip is cracked.

 

Have you looked at this option yet?
http://detoursusa.com/xjbackbone.php

 

The back bone is not available anymore