I know there are other post about this but hope someone can help . I put a new set of tires and a used set of the 5 spoke 15 inch jeep wheels with jeep on one of the spokes. had a vibration that started around 62ish and seemed to get worse going around sweeping turns . had rebalanced by different facility then it started just over 70 but not as bad . had the original rebalance and now it's back to the 62ish vibration . not violent but should be fixed . everything is stock except I went from steel wheels to the aluminium . help plz .

 

its in the wheel/tire combo. swap the tires from front to back to see if it gets better/worse.

a wheel could be bent, or (while rare with new tires) you might have a defective tire.

 

I'm leaning toward tire . the second place said I had a bent wheel but when checked on our machine at work it passed .