4.0 weight
#1
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Benton, KY
Posts: 711
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
4.0 weight
does anyone happen to know the weight of a 4.0 long block with the intake manifold?
Thinking about doing something that just might put those Bronco springs to good use...
Thinking about doing something that just might put those Bronco springs to good use...
#3
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Benton, KY
Posts: 711
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
A little, yes. Thank you.
I need to know the weight of the Ford 400 that I have. 575 is what I can find, but they don't specify whether or not that is dressed and filled with oil, or just the bare long block...
The chart that I found also lists the Chevy smallblock at 575 pounds, so If they truly are the same weight, I don't think I would have a problem...
I am thinking it has to be dressed weight, because it also lists a ford 302 as weighing 460 pounds and a friend of mine and I can lift a 302 long block and put them on an engine stand, done it many times.
I need to know the weight of the Ford 400 that I have. 575 is what I can find, but they don't specify whether or not that is dressed and filled with oil, or just the bare long block...
The chart that I found also lists the Chevy smallblock at 575 pounds, so If they truly are the same weight, I don't think I would have a problem...
I am thinking it has to be dressed weight, because it also lists a ford 302 as weighing 460 pounds and a friend of mine and I can lift a 302 long block and put them on an engine stand, done it many times.
Thread
Thread Starter
Forum
Replies
Last Post
CherokeeHoonigan
Modified XJ Cherokee Tech
89
07-04-2023 02:20 PM
NCDON
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
05-05-2021 07:44 PM
Bruce Hauptman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-05-2015 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)