33s on bone stock xj...
#1
Banned
Thread Starter
Join Date: Jul 2012
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
33s on bone stock xj...
What's up guys I got a 92 xj sport...its bone stock I just got a set of 33s for it but they don't look like they are going to fit...I was told to get a 4.5 lift but im getting impatient looking at these tire before I get this lift....anyone know any easy way or how much I would have to cut to put them on today
#2
Senior Member
Join Date: Jan 2012
Location: Kansas City
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
The easiest way to put them on is use the search function. Seriously, if you even just scrolled down a couple pages you'd probably run into this same thread.
#4
Banned
Thread Starter
Join Date: Jul 2012
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
My search on this app is being stupid so I had to make a post...my bad buddy sorry it was such a big deal to you..and thanks for the advice, im new to this off road thing..been racing motocross all my life had this jeep for 7 years and just now wanna lift it and take it off road... so you might see me on here alot
#5
Senior Member
Join Date: Jan 2012
Location: vanburen
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
You will have to cut about to the body line on the front fenders, and the rear just cut and fold them and possibly get a 3 inch lift I doubt you will get 33s on it stock unless you cut alot off the fenders . like mine ^^, my tires still get in the fenders with a 3 inch lift and 33s but only at full droop like you see.
Last edited by nickxj94; 08-01-2012 at 08:15 AM.
#6
What's up guys I got a 92 xj sport...its bone stock I just got a set of 33s for it but they don't look like they are going to fit...I was told to get a 4.5 lift but im getting impatient looking at these tire before I get this lift....anyone know any easy way or how much I would have to cut to put them on today
Oh and extend your bump stops a few inches. Problem solved. Well the front fender still may need and inch cut off. Rear just barely at the plastic bumper covers.
Last edited by holycaveman; 08-01-2012 at 08:27 AM.
#7
You will have to cut about to the body line on the front fenders, and the rear just cut and fold them and possibly get a 3 inch lift I doubt you will get 33s on it stock unless you cut alot off the fenders . like mine ^^, my tires still get in the fenders with a 3 inch lift and 33s but only at full droop like you see.
Trending Topics
#13
#14
Junior Member
Join Date: Jul 2012
Location: DuPont, WA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
I have 33 x 10.5 x 15's on mine with a 3" lift and it rubbed a little on the front fender. I cut about 2 1/2" off the fender and I have no issues any more. Just need to cut and fold the rear. Also, I don't have any back spacing so that might have been the issue.