2000 Cherokee 115000 original miles broke yesterday, all of sudden won't run past 1000-1500 rpm.Misses ,backfires...CrawlefdCrawlefd home at 15-20mph.No vacuum leak,no furl pump problem. Out of town fellow Jeep neighbor followed to new shop.Throws multiple codes miusfiring ,nothing pinned down. maybe distributerless module? Unplugged still ran,can idle smooth, but throttle up she misses, bacfires stalls and dies. Help!
CF Veteran
First, welcome to the forum. Second, we are here to help. With that being said, we appreciate proper grammar and punctuation as well as clearly stated symptoms/problems, otherwise this post may be overlooked.
Please provide the codes the jeep has stored.
Please provide the codes the jeep has stored.
Quote:
Please provide the codes the jeep has stored.
Codes provided by shop are:300,301,302.Mechanic at NAPA shop now believes failed coil pack.Makes sense, enough juice for idle not enough for off idle.Originally Posted by Jeepin'_Aint_EZ
First, welcome to the forum. Second, we are here to help. With that being said, we appreciate proper grammar and punctuation as well as clearly stated symptoms/problems, otherwise this post may be overlooked. Please provide the codes the jeep has stored.
CF Veteran
P0300-Random/multiple misfire detected
P0301-Misfire cylinder 1
P0302-Misfire cylinder 2
So you came on here for what then? You basically did no diag work and it's at the shop being repaired? If you weren't going to do the work yourself what was the point? I'm genuinely curious
P0301-Misfire cylinder 1
P0302-Misfire cylinder 2
So you came on here for what then? You basically did no diag work and it's at the shop being repaired? If you weren't going to do the work yourself what was the point? I'm genuinely curious
CF Veteran
Quote:
P0301-Misfire cylinder 1
P0302-Misfire cylinder 2
So you came on here for what then? You basically did no diag work and it's at the shop being repaired? If you weren't going to do the work yourself what was the point? I'm genuinely curious
Perhaps to get some knowledge so the shop doesn't rip him off hahaOriginally Posted by Jeepin'_Aint_EZ
P0300-Random/multiple misfire detectedP0301-Misfire cylinder 1
P0302-Misfire cylinder 2
So you came on here for what then? You basically did no diag work and it's at the shop being repaired? If you weren't going to do the work yourself what was the point? I'm genuinely curious
CF Veteran
Lol well if I had a jeep come into my garage for diag and I have it down to the coil being bad and the customer comes back saying its got to be this other part because the interwebs told him so, I'd back his jeep out and tell him to have the interwebs fix it then.
CF Veteran
Quote:
Hey now I was just speculatingOriginally Posted by Jeepin'_Aint_EZ
Lol well if I had a jeep come into my garage for diag and I have it down to the coil being bad and the customer comes back saying its got to be this other part because the interwebs told him so, I'd back his jeep out and tell him to have the interwebs fix it then.

