winch help
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: provo, utah
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
winch help
I need some spec off some one's winch please here's what I need to know. How wide it is or a suggestion on How far I should hold my bumper Out?? Next I need to know measurements of the hole on the winch so I can drill then. Thanks for ur help
#2
Seasoned Member
Join Date: Jun 2010
Location: Illinois
Posts: 397
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
not really a fab question but the bolt pattern on most is 10" x 4.5"
as far as actual winch size i think itll depend on which one you get they all differ alittle there is a chart on here some where if you search
one chart for winch ratings and another drawing of a few different winchs with sizes
as far as actual winch size i think itll depend on which one you get they all differ alittle there is a chart on here some where if you search
one chart for winch ratings and another drawing of a few different winchs with sizes
#3
Seasoned Member
Join Date: Jun 2010
Location: Illinois
Posts: 397
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
the dimensions i have are for a smittybilt xrc8
Mounting Bolt Pattern: 10in x 4.5in (4 bolts, 3/8in) (254 mm x 114.3 mm)
Overall Dimension: (LxWxH): 21in x 6.22in x 7.283in (558.8 mm x 158 mm x 185 mm)
Overall Dimension: (LxWxH): 21in x 6.22in x 7.283in (558.8 mm x 158 mm x 185 mm)
#4
CF Veteran
Join Date: Jan 2011
Location: Converse, Texas
Posts: 1,651
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Smittybilt XRC 10
Mounting points- 10" x 4.5"
Approximate winch size- 21.5" x 6"
I'd have to take apart the brush guard on my bumper to get exact measurements for the winch itself, but the mounting hold are from the center of the bolts.
Mounting points- 10" x 4.5"
Approximate winch size- 21.5" x 6"
I'd have to take apart the brush guard on my bumper to get exact measurements for the winch itself, but the mounting hold are from the center of the bolts.
#5
Senior Member
Thread Starter
Join Date: Mar 2011
Location: provo, utah
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Evilpopcorn
Smittybilt XRC 10
Mounting points- 10" x 4.5"
Approximate winch size- 21.5" x 6"
I'd have to take apart the brush guard on my bumper to get exact measurements for the winch itself, but the mounting hold are from the center of the bolts.
Mounting points- 10" x 4.5"
Approximate winch size- 21.5" x 6"
I'd have to take apart the brush guard on my bumper to get exact measurements for the winch itself, but the mounting hold are from the center of the bolts.
#6
Junior Member
Join Date: Mar 2010
Location: toms river, new jersey
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
You can go to every winch manufacturer and they give exact dimensions and technical drawings for all their winches. I found that out when I was gonna start building winch bumpers.
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
12-28-2020 05:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)