i got new seats in the front and i wanna know if i could fab up the stock front ones for the back and get rid of the bench

 

That's the great thing about Jeeps. You can do what you want..

If it's with in your ability and mind set YES YOU CAN..

 

has anyone done this before? Anyone got any pictures of what it will look like just trying to get my mind set.

 

I have actually been considering this for some time but it appears to me that your head room is not adequate to do this. I would like to see it if you get it done because i have an extra set of seats specifically for this.

 

I dont think you can unless you ripped out the little cubby area underneath and somehow made brackets to make it work. then again the leg room would be down to nothing since they bottom seat portion length is longer then the bench too. Food for thought...

 

from what it looks like you wouldnt have enough head room because the seats are to tall.You would have to cut the floor pan and recess the floor and weld in some to braces


More trouble than its worth in my opinion

 

i agree with tanker blade. there is a bar the runs across to floor if you took the out you could than cut into the elevated cargo area to move the seats and than re box the floors leaving you with good head and leg room but that goes back to what your abilities are

 

i did it today wasnt that hard. i will put pictures on later. i already had the seats off the brackets because i had to use them with my new bucket seats in the front. head room is good feet room is a lil limited but it was with the bench seat too. and now 6 people wont try to crawl in the back of my jeep lol

 

my front seats

 

 

 

i like the idea could you possibly post some taken during the day and explain how you mounted them i was thinking about doing the same thing