Rusty
11-07-2009, 06:36 PM
#1
Member
Thread Starter
Join Date: Aug 2009
Location: Wheatfield,Indiana
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 4.0L MFI 6cyl
Rusty
Hey guys, how would I go about fixing this spot on the Jeep? It is right under the driver and passenger doors. Looks like a bolt sticking through it. Maybe some replacement parts?
11-07-2009, 06:44 PM
#3
Member
Thread Starter
Join Date: Aug 2009
Location: Wheatfield,Indiana
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 4.0L MFI 6cyl
That is kind of what I was thinking. I wonder if this would be the replace piece for that. http://www.quadratec.com/products/72608_8600_07.htm
11-07-2009, 07:49 PM
#4
Newbie
Join Date: Nov 2009
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
it is a seat bolt.. i just finshed fixing my floors... i cut that out and welded a piece of metal from the rocker to the other side of the frame and drilled a hole for a new seat bolt.. I cut my floors out and made new ones.. you might want to do that too.. since there some rot holes... mine was like that..it looks like theres some floor board there but its just rust wating to fall out...
Last edited by junkyarddog; 11-07-2009 at 07:56 PM.
11-07-2009, 08:08 PM
#5
Member
Thread Starter
Join Date: Aug 2009
Location: Wheatfield,Indiana
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 4.0L MFI 6cyl
it is a seat bolt.. i just finshed fixing my floors... i cut that out and welded a piece of metal from the rocker to the other side of the frame and drilled a hole for a new seat bolt.. I cut my floors out and made new ones.. you might want to do that too.. since there some rot holes... mine was like that..it looks like theres some floor board there but its just rust wating to fall out...
Yeah, it's pretty bad on the rockers and rear of the Jeep. The middle of the floor is solid "luckily" Thanks for the info guys!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)