Quick 360 swap questions.
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Quick 360 swap questions.
Alright, I'm in the planning stages of my 360 magnum swap into my 94' XJ.
I'm looking to see if anyone else here has done this swap, if so, what are my options for frame side mount brackets (custom obviously) just looking for pics. Also, how is exhaust clearance?
Second, what transmission would work with my NP242 and bolt up to the 360? I'm from the GM camp for the most part, and it's taken quite a bit of self control to keep from stabbing a 383/700R4 combo in this thing and calling it a day.
I'm looking to see if anyone else here has done this swap, if so, what are my options for frame side mount brackets (custom obviously) just looking for pics. Also, how is exhaust clearance?
Second, what transmission would work with my NP242 and bolt up to the 360? I'm from the GM camp for the most part, and it's taken quite a bit of self control to keep from stabbing a 383/700R4 combo in this thing and calling it a day.
#2
Seasoned Member
Join Date: Nov 2009
Location: sarasota Fl
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91
Model: Cherokee
Engine: 5.9
Im in the middle of the same project, almost. AMC 360 with a chrystler 727 trans and Quadratech tc. its a tight fit but Ill get some pics up as soon as I can.Im new to fabrication so it probbaly wont look to great but might give you some ideas
Thread
Thread Starter
Forum
Replies
Last Post
Tankpb
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-19-2015 06:29 AM
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)