need lid for snork!
04-18-2010, 06:48 AM
#1
Seasoned Member
Thread Starter
Join Date: Apr 2010
Location: Oly WA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
need lid for snork!
Ok, this my first post and I'm looking a cool scoop of some kind for the intake on my redneck engineer'd snorkel. It's made of 3in exhaust pipe with 1 bend and stock filter box plus some black pvc under the hood (look'in good). If you've got an idea let me know and if you want to talk **** go to toyota site and talk about 22r's, IFS and stuff.
05-16-2010, 12:54 PM
#5
Seasoned Member
Thread Starter
Join Date: Apr 2010
Location: Oly WA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
My 7 year old tests snork!!!
So I used the top of a hot tub pump to top off my snork, its glued to 3in pvc so I can turn it for hard rain road driving (Washington state). Sorry it took me so long to re-post but was having to much fun to sit down. We put the toys on trailer and ran some events at the Cadillac Ranch for mothers day weekend. My jeep got another 1st place in 4/6 cyl drags & my son dustin drove it right in and out of the bog both runs for the kids class. Check out his run on youtube!!! PS I was very proud of my 7yr old son & my jeep this weekend. Dustin Wins the Kids Championship of Mud Bogs at Cadillac Ranch Motor Sports
Last edited by blackjeeps420; 05-16-2010 at 03:57 PM.
05-16-2010, 12:58 PM
#6
CF Veteran
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
aww the link to your vid doesnt work 
05-16-2010, 04:02 PM
#7
Seasoned Member
Thread Starter
Join Date: Apr 2010
Location: Oly WA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
Trending Topics
05-19-2010, 05:15 PM
#13
Seasoned Member
Thread Starter
Join Date: Apr 2010
Location: Oly WA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92
Model: Cherokee
Engine: 4.0
redneck snork
Ok I started by cutting a hole for 3in pvc in the back of the air box and fender. Then cut two 3in long 3in pvc chunks & glued one in the hole in the back of the box and glued a cap on the stock hole. Then a 90 deg. tube on the pvc out the back then other 3in chunk of pvc to connect the 90 deg. tube that sticks out of the fender. Then 3in exhaust pipe, Don't use pipe bender unless you want my wrinkles in your pipe (I should have used tube bender) also don't buy your 3in pipe on sunday from napa!! 90s came off jeeps at junk yard for $2, plus two clamps at parts store. Good luck with the cap.