My fabrication projects for my XJ
#1
Newbie
Thread Starter
Join Date: Aug 2017
Location: West Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 inline 6 cylinder
My fabrication projects for my XJ
So I've had my XJ almost a year, an ice been bitten by the fab bug pretty bad. Although I'm not I've not really fabricated things of this kind before, I'm giving it a shot. So if you have any tips or ideas, let's hear them!
#2
Newbie
Thread Starter
Join Date: Aug 2017
Location: West Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 inline 6 cylinder
First up, my EMT roof rack
This was the first version but it didn't have enough support, so I ended up shortening it
Here is the finished product
#3
Newbie
Thread Starter
Join Date: Aug 2017
Location: West Virginia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 inline 6 cylinder
My homemade pipe bumper
I wanted to build my own bumper, so I took some plate steel an 2 inch pipe an built on. It's not intended as a recovery point nor will any shackles be put on it. I mainly wanted to change it up, it's my daily driver and is not a trail rig. So I didn't want to go to crazy.
Thread
Thread Starter
Forum
Replies
Last Post
1ABrian
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
10-27-2010 06:00 PM
SleepyTA
Other Vehicles. Other Jeep models & cars and trucks of other makes
3
09-18-2010 09:10 PM
Jeepfreak1020
Fabrication & builders section.
5
09-12-2010 11:47 AM
01LimitedXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-30-2008 06:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)