Any updates??

 

haha sorry i am getting back to this build had other little projects i started

 

well i got to it finally

Before


this is going to be fun

 

It took a lot of cleaning to get this far

 

some progress

 

Forming the stiffiners



The starting point for the under belly low profile skid plate

 

Update




Low profile underbelly skid plate


All the nuts welded to the backside


The rockslider tabs and skid plate sides

 

Ruff stuff stiffiners work nicely so far even with all the fab i did to them

Got them first cleaned up the underails to bare metal to test fit them

Then cut the front off so they fit withthe lower control arm brackets

had to bend the pieces to fit the frame then tac welded them to keep shape

With my set i modded to use with a custom belly pan and rocksliders

once in mock up place then drill all the holes in the stiffiners and frame rails to fit the bolts and nuts for the RS and BP

 

4415 view and 10 comments

 

aren't you supposed to put a bead in those top oval cutouts? i just dont see many welds here...maybe cause your pics are so blurry.

p.s. why are you so worried about comments...?

 

Its a push to work on it also i didnt finish welding them up yet. time is hard to find to work on it

i get to post stuff on here at work

 

found some time today.



Driver side is done have to do the fill in welds

 

am i missing something? i don't see anything different than in post #22...

 

Yep, Rust !
LOL
Nitro