My 4dr rockslider and uni-body stiffeners
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
My 4dr rockslider and uni-body stiffeners
i made these but i didnt install them yet
driver side
Passenger Side
There made from 1/4 thick seamless harded boiler pipe. There 1.75" diameter. the sliders will be welded to 1.50" square stock on 3x3" mild plate steel with 4 bolt holes. The uni-body will be stiffened up with 1/4" plate steel. the sliders will be mounted to the stiffened uni-body by drill and trap in the plate steel so they can be romoved if needed. also going to put bump stop pads on them to lessen the force of a rock or any other impact
I also made door protection bars 4 the sliders but dont have any pics yet
driver side
Passenger Side
There made from 1/4 thick seamless harded boiler pipe. There 1.75" diameter. the sliders will be welded to 1.50" square stock on 3x3" mild plate steel with 4 bolt holes. The uni-body will be stiffened up with 1/4" plate steel. the sliders will be mounted to the stiffened uni-body by drill and trap in the plate steel so they can be romoved if needed. also going to put bump stop pads on them to lessen the force of a rock or any other impact
I also made door protection bars 4 the sliders but dont have any pics yet
Last edited by gobbs_stopper; 01-28-2010 at 12:29 PM. Reason: forgot
#2
CF Veteran
Join Date: Dec 2008
Location: eaton ohio
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Year: 93
Model: Cherokee
Engine: 4.0
i would suggest making them so that they are actually right under the slider and protect it more cause right now they just look like steps
#4
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
there going right under the diamond plate rockers. the pics are just to show the look of them.
#7
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
#13
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
#14
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
well i will be ordering my body stiffiners from ruff stuff Dan. so when the weather breaks and i can weld in my shop again i will built the rest of the slider and front winch bumper