Homebrew Jeep Mods
#2146
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Originally Posted by Kopecki
That i know is wrong. 97+ xjs have seperate plastic sound bars while 96 and older xjs have fiberglass soundbars. 97+ Sound bars are a little wider than 96 and older soundars but can be trimmed to fit rather easily. 97+ soundbars look like they are build in because they are under the fabric while 97 and older are seperately wrapped.
This is speaking from experience. I used to have two 97+ Xj soundbars in my rig.
Last edited by xj_maniac_newb; 10-20-2011 at 09:07 PM.
#2147
Junior Member
Join Date: Apr 2011
Location: CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: Straight 6
this is more of a question for homebrew...my interior light doesnt go off wen i shut the doors and turn the **** over to adjust the lights..anyone who did a simple mod on this???i hagv it unplugged for rite now
#2150
Member
Join Date: May 2010
Location: Concord, NH
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
one of your door switches is no good... need to check each door, and hatch?? my hatch has a switch inside the latch ('98 sport)
#2151
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I have damage to my right rear door, and the metal doesn't push the button in to cut the lights. I had to tape an eraser to the inside of the door to make contact so the light goes off.
#2155
CF Veteran
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
When I got this jeep I just figured out which switch was bad and unscrewed it and monkey with it till the light would turn off when the door was shut.
#2156
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
well that is homebrew.
#2157
CF Veteran
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Originally Posted by NewKindOfClown
My '01 doesn't light up when the hatch is opened, but maybe mine's broken?
I have damage to my right rear door, and the metal doesn't push the button in to cut the lights. I had to tape an eraser to the inside of the door to make contact so the light goes off.
#2158
Seasoned Member
Join Date: Aug 2011
Location: doswell va
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
hey i just tried to wire my fan up so it runs when the key is on. but as soon as the wire touched the terminal the fan came on, and the key was in my pocket so it definitly wasnt turned on. any suggestions?
#2159
CF Veteran
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Originally Posted by toogreat
hey i just tried to wire my fan up so it runs when the key is on. but as soon as the wire touched the terminal the fan came on, and the key was in my pocket so it definitly wasnt turned on. any suggestions?
#2160
CF Veteran
Join Date: Jan 2010
Location: j-burg NY
Posts: 1,117
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 2.5l 4 cyl
Originally Posted by toogreat
hey i just tried to wire my fan up so it runs when the key is on. but as soon as the wire touched the terminal the fan came on, and the key was in my pocket so it definitly wasnt turned on. any suggestions?