Front stealth bumper
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 695
Likes: 0
From: Arizona
Year: 2000
Model: Cherokee
Engine: 4.0
Customizer1000
I dont have to lay under the jeep to engage or disengage the cluth. I can just reach down. the handle is at the bottom of the bumper.
wiggles
The order would be placed all in one. If we get enough to make the order Im sure doc will work with you on that
I dont have to lay under the jeep to engage or disengage the cluth. I can just reach down. the handle is at the bottom of the bumper.
wiggles
The order would be placed all in one. If we get enough to make the order Im sure doc will work with you on that
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
[QUOTE="n_a_i_w"]Customizer1000
I dont have to lay under the jeep to engage or disengage the cluth. I can just reach down. the handle is at the bottom of the bumper.
Oh ok, it looked like the handle was at the top
I dont have to lay under the jeep to engage or disengage the cluth. I can just reach down. the handle is at the bottom of the bumper.
Oh ok, it looked like the handle was at the top
Senior Member
Joined: Jul 2011
Posts: 745
Likes: 0
From: Los Lunas, NM
Year: 1998
Model: Cherokee
Engine: 4.0L High Output
whoops sorry i ment to the cherokee its late where i am like where were to bolts mounted to for the upper brackets...do you get what i mean?
Seasoned Member
Joined: Nov 2011
Posts: 499
Likes: 0
Originally Posted by n_a_i_w
here are some pictures i stole from my other threads of the rear bumper.
Some of the welds
Here are some welds on the rear support structure. he welded 3 addition passes over main supports.
Here is the link to stone soup with my jeep.
http://www.facebook.com/media/set/?s...5811010&type=1
Here is one Doc biult with a tire carrier
http://www.facebook.com/#!/media/set...5811010&type=1
And a removable exo on a K5 Blazer.
http://www.facebook.com/#!/media/set...5811010&type=1
All his biulds
http://www.facebook.com/#!/media/alb...08891915811010
Some of the welds
Here are some welds on the rear support structure. he welded 3 addition passes over main supports.
Here is the link to stone soup with my jeep.
http://www.facebook.com/media/set/?s...5811010&type=1
Here is one Doc biult with a tire carrier
http://www.facebook.com/#!/media/set...5811010&type=1
And a removable exo on a K5 Blazer.
http://www.facebook.com/#!/media/set...5811010&type=1
All his biulds
http://www.facebook.com/#!/media/alb...08891915811010
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 695
Likes: 0
From: Arizona
Year: 2000
Model: Cherokee
Engine: 4.0
The bumper is mounted on each side the the original bumoer mounts along with being tied into the unibody with the tow hitch mounts. 14 bolt points total.
Thread Starter
Senior Member
Joined: Jun 2010
Posts: 695
Likes: 0
From: Arizona
Year: 2000
Model: Cherokee
Engine: 4.0