EXO CAGE TIME!
#1
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Edwards AFB CA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L H.O.
EXO CAGE TIME!
so for the last few months ive been knocking around ideas about an interior cage and then realized i dont wanna take out my interior. but my question is where are the best points to mount them. i want to see what some of you guys have done (if any). thanks for the help guys.
#6
Registered Users
Join Date: Jul 2009
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91 with lots of 01' parts
Model: Cherokee
Engine: 01' 4.0L
no i cant find any pics of it. i just drilled some 1 3/4 holes in my roof and floor at the same place behind the seats. ran some 1 1/2 dom thru the hole in the floor then thru the roof to my exo. i then cut my tubes to length and added some 4x8x1/4'' plate to the floors where the tube mounts. welded all that crap in then fit another tube across horizontal with the top of the back of the seats. that is the tube my 4-points hook to.
i am soon adding more to the interior part of the cage to get more triangulation.....its hard to do with an exo. i dont really care about the weight of extra tubes or i would be building a buggy, not a full bodied rig!!
Trending Topics
#8
Registered Users
Join Date: Jul 2009
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91 with lots of 01' parts
Model: Cherokee
Engine: 01' 4.0L
#9
Registered Users
Join Date: Jul 2009
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
Year: 91 with lots of 01' parts
Model: Cherokee
Engine: 01' 4.0L
#12
Member
Join Date: Nov 2009
Location: Lake of the ozarks, MO
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
here is my exo.....its a 10 point cage. mounts to the front and rear bumpers, sliders in two spots and thru the roof behind the front seats for my 4-point harnesses...used to be 12 point but the tubes between the front doors got to smashed and i couldnt get the doors open. everything ties into the unibody. this pic is from april ejs 2009. there was a dirty cancer stick in my hand...not anymore!!!
#13
Senior Member
Join Date: Oct 2009
Location: Redlands, CA
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L I6
#14
Seasoned Member
Join Date: Aug 2007
Location: Illinois
Posts: 399
Likes: 0
Received 4 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
That is a sweet looking cage. I've wanted to get a roll cage but i think im too tall, and id knock myself out on the center bar that goes above the driver and passenger seats... so an exo looks like the way to go