Diamond Plate Door Panels
#1
Newbie
Thread Starter
Join Date: Jan 2013
Location: Greenville, SC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L Inline 6
Diamond Plate Door Panels
I'm currently in the process of fabricating some xj door panels out of some diamond plate. I don't usually post too much stuff, but I have yet to find anything about custom fabbed door panels for an xj so I decided to start a thread. So far I've only got around to rough cutting the sheets. Seems that every time I'm not doing school work, I'm out wheeling or working with my baja SAE club. Haven't had a lot of time to work on the doors panels, but I'm gonna try and finish them soon. I plan on replacing the power window switch with a momentary toggle switch and possibly upgrading my door speakers while I'm at it. I bought the metal for $40 so I've figure since I saved money on that, I'll spend some elsewhere.
#3
CF Veteran
It will look nice but be very hot if the sun has been hitting it. Also, I'm interested in seeing what you come up with for the armrests.
#5
CF Veteran
I thought about doing this to mone, but then the idea of summer killed it....well that and I was broke at the time...
#6
Hello fellow Cherokee owners.I have just purchased my 2nd Cherokee.A 1995 .I will be working on the rear floors for sure.This is a retirement project for my youngest boy and I.well r both jeep me with a passion.PS diamond plate will be used.ha ha.happy to be a member
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
John T
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-19-2022 11:27 AM
HappyTrails
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-11-2015 10:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)