Custom Low Profile Belly Skid Pan 4 T-Case. Off Of Ruff Stuff Stiffiners
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Custom Low Profile Belly Skid Pan 4 T-Case. Off Of Ruff Stuff Stiffiners
Custom Low Profile Skid Plate 4 T-Case. Off Of Ruff Stuff Stiffiners
So i been doing the Ruff Stuff Unibody Frame Rail Stiffeners. And decided to make A Skid Pan
This bent & twisted piece of #%&@ isnt going to cut it anymore
I started with the cut off pieces from the stiffiners
The cut off pieces from the stiffiners. are the starting point for this build. I used the right cut off for the left side and the left for the right
Dan is the man from ruff stuff
So i been doing the Ruff Stuff Unibody Frame Rail Stiffeners. And decided to make A Skid Pan
This bent & twisted piece of #%&@ isnt going to cut it anymore
I started with the cut off pieces from the stiffiners
The cut off pieces from the stiffiners. are the starting point for this build. I used the right cut off for the left side and the left for the right
Dan is the man from ruff stuff
Last edited by gobbs_stopper; 10-24-2012 at 10:45 AM.
#4
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
build something to comment on, waiting to see what it turns out to be like... it just looks like a XJ with stiffeners and the cross-member taken off. not being mean. just saying, where is the update?
#7
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
comments are a push to get stuff done. people say i make and build cool stuff. I like to post alot of pics to show the work. I not going to post stuff after i build it
#9
CF Veteran
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
Really dont see where you have done a lot of work on a flat belly... YOu tacked in some stiffners.
If you look on my webshots page you willsee a flat skid I built for my XJ... it is flat event with bent frame rails
http://rides.webshots.com/photo/2968...57109497pfuyZi
#10
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
Really dont see where you have done a lot of work on a flat belly... YOu tacked in some stiffners.
If you look on my webshots page you willsee a flat skid I built for my XJ... it is flat event with bent frame rails
http://rides.webshots.com/photo/2968...57109497pfuyZi
If you look on my webshots page you willsee a flat skid I built for my XJ... it is flat event with bent frame rails
http://rides.webshots.com/photo/2968...57109497pfuyZi
#12
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L
not sure you can clock it. and no just covering up the transfer case and making arm to guide rocks to the tires and not my floors. been working on it so far so good. cant post the pics cams upload cable is lost at the moment
#14
Originally Posted by gobbs_stopper
not sure you can clock it. and no just covering up the transfer case and making arm to guide rocks to the tires and not my floors. been working on it so far so good. cant post the pics cams upload cable is lost at the moment
#15
Senior Member
Thread Starter
Join Date: Jan 2010
Location: barnesville pa 18214
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 1996 1997
Model: Cherokee
Engine: 4.0L 5.2L