couple dash questions
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: AK
Posts: 52
Likes: 0
Received 1 Like
on
1 Post
Year: '00wj, '90mj, '87mj, '86mj trailer
Engine: 4.0, 4.0, 4.0, none
couple dash questions
1. how much depth in the area outlined in red, enough room for a stereo?(after deleting the heater ducting)
2. what is there for support under the padded area outlined in green?
2. what is there for support under the padded area outlined in green?
#2
CF Veteran
Join Date: Oct 2009
Location: Parrish
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Comanche
Engine: 4.0
I am not 100% sure but I am pretty sure that if you remove the air duct there would be enough room for a stereo. Although you may have to relocate the air conditioning vacuum switch things.
#4
Member
Join Date: Jul 2009
Location: Seattle, Wa
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
oh and no support just some thin metal under the padding that comes out all as once piece and whats left is in the picture above
#5
Babington style waste oil heater pumps
The cam gear pump works fine for filtered WVO or used motor oil Babington heaters and I have installed it on my Babington style heaters. Ldu Company's stock number is 450516 , The only thing about the cam gear pump is that the fire kind of pulses as the cam gear rotates. If you use the spur gear pump that is LDU's stock number 450512 then you get a steady non-pulsing fire. The WVO pump website is http://www.liangdianup.com/subpages/oilpump_1.htm or you can click through to the tools section from the home page at www.LDUcompany.com
LDU Company also has other parts that I use for building my waste oil burners, like gear reduction motors. I find it best to turn the pump slower because you really don't need a whole lot of oil dripping on the atomizer ball.
LDU Company also has other parts that I use for building my waste oil burners, like gear reduction motors. I find it best to turn the pump slower because you really don't need a whole lot of oil dripping on the atomizer ball.
#6
Junior Member
Thread Starter
Join Date: Nov 2009
Location: AK
Posts: 52
Likes: 0
Received 1 Like
on
1 Post
Year: '00wj, '90mj, '87mj, '86mj trailer
Engine: 4.0, 4.0, 4.0, none
oh and no support just some thin metal under the padding that comes out all as once piece and whats left is in the picture above
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Nov 2009
Location: AK
Posts: 52
Likes: 0
Received 1 Like
on
1 Post
Year: '00wj, '90mj, '87mj, '86mj trailer
Engine: 4.0, 4.0, 4.0, none
Why not just get a stereo with a removable faceplate? Would be much easier
and have it removable, but also securable so i can go into a gas station or what have you
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
Soilman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 07:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)