I decided to put my CB in my dash under the steering column.
I started by deciding where i wanted it to in the plastic then cut the hole after taking the bottom plastic out which is like 6 bolts and to plastic caps holding on the relay panel and a velcro holding on a box and you unplug another box on the passenger side.
Then i cut and welded some brackets to the back and screwed in the CB to the brackets.


I had to relocate the relay panel just higher up with wire tie never got a pic of it i think you guys could figure it out. And finished product.


Hope you all enjoy any questions i can help out.

 

Good deal. I guess you could even set a small external speaker off to the left in that louvre thing.

 

Ya i could its open right there

 

my only concerns would be the cord being down around your feet and knocking my shins and knees on it wheeling...other wise throw a trim bezal and figure out the cord situation...good job

 

I mounted the holder up higher so it does not rub and whats a trim bezel

 

NICE JOB! also i own that same model cb.

 

looks good

 

You know if you can amplify it or anything

 

its been a while since i fiddled with mine, but i think you can amplify them. i never did on my jeep though i just had a big whip and a PA system hooked up

 

Looks good..great job =]

 

Thanks

 

trim ring around the cb

 

Who has one of those

 

you can fab one up...or have one made...message me the dimensions and i'll see if i have something laying around or next time i have some cnc cuts done i can see if i can throw it in there to be cut

 

Ok ill measure tomorrow