Bending DOM
CF Veteran
Joined: Nov 2011
Posts: 7,387
Likes: 10
From: City of Trees, CA
Year: 93 2 door
Model: Cherokee
Engine: 4.0
keep the bender and pay it off by doing work for your buddies
Thread Starter
Member
Joined: Jul 2015
Posts: 156
Likes: 0
From: Tehachapi CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Build a few other things. Sell them on CL. Pay back bender.
Build a few more things. Sell them on CL. Profit.
Etc etc etc.
I really wish I had a 1.5" die and bender. I want to build a custom roof rack and bed rack for my truck.
Thread Starter
Member
Joined: Jul 2015
Posts: 156
Likes: 0
From: Tehachapi CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Build a couple roof racks out of 1.5". Sell them on CL. Buy another die.
Build a few other things. Sell them on CL. Pay back bender.
Build a few more things. Sell them on CL. Profit.
Etc etc etc.
I really wish I had a 1.5" die and bender. I want to build a custom roof rack and bed rack for my truck.
Build a few other things. Sell them on CL. Pay back bender.
Build a few more things. Sell them on CL. Profit.
Etc etc etc.
I really wish I had a 1.5" die and bender. I want to build a custom roof rack and bed rack for my truck.
Thread Starter
Member
Joined: Jul 2015
Posts: 156
Likes: 0
From: Tehachapi CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
I have decided to go with the Model 600 Tradesman that comes with the following 5 piece die set....
*2.00×6.00″ CLR (Center Line Radius) Die Set
*1.75×6.00″ CLR HD Die Set
*1.50×4.50″ CLR Die Set
*1.25×4.50″ CLR Die Set
*1.00×3.50″ CLR Die Set
They do allow substitutions and thought it might be good to have one square tubing die. Not sure which one to omit or what size square tubing die to get. I was thinking the square tubing for roof racks.
*2.00×6.00″ CLR (Center Line Radius) Die Set
*1.75×6.00″ CLR HD Die Set
*1.50×4.50″ CLR Die Set
*1.25×4.50″ CLR Die Set
*1.00×3.50″ CLR Die Set
They do allow substitutions and thought it might be good to have one square tubing die. Not sure which one to omit or what size square tubing die to get. I was thinking the square tubing for roof racks.
Last edited by RickJames Bish; Aug 27, 2016 at 09:02 AM.
Thread Starter
Member
Joined: Jul 2015
Posts: 156
Likes: 0
From: Tehachapi CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Got it
Bender arrived this past Friday. Assembled and finished over the weekend. Also got their notcher and have already used it on a friends shock hoops. Worked very well.
::CF Administrator::
Joined: Feb 2011
Posts: 14,479
Likes: 805
From: Blunt, South Dakota
Year: 97
Model: Cherokee (XJ)
Engine: 4.6 stroker
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
nice. good job on stepping up and getting something that will work for many projects. should have this thing paid off in no time.
i just have one die with my pro-tools 105HD. i have the 1.75x240 radius. i figure if i need a 1.5 die, i can just make a sleeve to fit my die to accept a 1.5 tube. my buddy did this and it works pretty good.
i also have the notcher, makes easy work and precise notches. no grinding for hours. lol.
now go make some money with that thing. people will pay.
i just have one die with my pro-tools 105HD. i have the 1.75x240 radius. i figure if i need a 1.5 die, i can just make a sleeve to fit my die to accept a 1.5 tube. my buddy did this and it works pretty good.
i also have the notcher, makes easy work and precise notches. no grinding for hours. lol.
now go make some money with that thing. people will pay.
Thread
Thread Starter
Forum
Replies
Last Post
Martlor13
Modified XJ Cherokee Tech
34
Jun 15, 2016 10:24 PM
Zombie Max
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
May 23, 2016 05:03 PM
Morris4x4Center
Vendor Showcase
0
May 5, 2016 12:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
