what exactly is this for? i have a standard 5 speed is that why this doesnt look familiar to me? or am i just forgetting what it looks like under my center console.


and your not allowed to sell out of the fabrication section.

this needs to be moved to the vendor section. esp with the way you seem to be collecting money before the product is finished.

 

Yeah, sorry bout that

 

If you have a 1997-2001 Jeep XJ then this replaces the plastic bracket that goes under the center console.

Sorry I didn't know.

How do you move it to the Vender Section

 

wow i feed like an idiot idk how i managed to not read 1998 in the title.
i have a 96 lol

and as far as moving to the vendor section.
dont be sorry your not the first nor the last. no one seems to understand the fab section. i did the same thing awhile back but the mods were alot more policing back then everyones stepping down nowadays and tthings seem to be getting sloppier and sloppier..


anyyways. to move to vendor section you go to vendor section and i think theres a sticky note at the top about how to become a vendor and the rules and such..

once in the vendor section you can continue on exactly as you are collecting money before products are finished.

 

How does the center console mount in the 1984-1996 xjs

 

Moved here
https://www.cherokeeforum.com/f74/19...racket-158249/

 

Have 3 painted and 3 bare metal. Pm me if your interested

 

Hope you don't mind, but I stole your idea...made mine today, some minor trimming and holes drilled is all that's left, then paint. I did mine slightly different, though, what do you think? (and don't worry, I'm not selling any!!!LOL)

 

Cool, yeah all I did it make a cardboard template of the plastic bracket and then scanned that into the computer. You would probably have a hard time making a lot of those and selling them without a plasma table. What did you use tho make the 2 upright pieces?

 

I too used cardboard, but just used my template pieces and cut the steel...CAD stands for cardboard aided design!!! The uprights are 3/4" square tube with a small piece of 16 gauge welded on the end. I so want a plasma table, though! Found some online for around 4k minus the cutter, table only, so thats a ways off yet.....

 

My father traded a BMW motorcycle that he fixed up for a plasmaCAM table. He has 2 plasma cutters.

 

nice, I'm jelly

 

He's had it for 4 years.

 

Anyone still making these??? Man, I need one... like the rest of us.

I was thinking of making my own, but I'd rather just pay for one.

JR