Timing belt question????
#1
Newbie
Thread Starter
Join Date: Aug 2012
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Timing belt question????
All the marks are lined up both cams and crank , old belt marks will not line up with the timing marks correct ? Been a while since I done a belt and just want to make sure . Thanks
#3
Senior Member
Join Date: Dec 2010
Location: Norman, OK
Posts: 698
Likes: 0
Received 2 Likes
on
2 Posts
Year: 95
Model: Grand Cherokee
Engine: 4.0
Some belts have timing marks on the belt, is that what you are talking about? If so dont worry about it as long as you have the gears lined up on their marks. Put the slack of the belt on the tensioner side too and if reusing a belt then make sure its spinning the same way as it did before.
#5
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
once its on and the pin is out of the tensioner I would roll the crank over twice (by hand) and make sure it all still lines up, especially if its interference.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Jooman07
Modified XJ Cherokee Tech
25
08-28-2015 02:25 PM
dave1123
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-25-2015 08:13 PM
ButtStripe
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-20-2015 02:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)