Honda CB360T cafe build
#1
CF Veteran
Thread Starter
Join Date: May 2010
Location: New Hampshire
Posts: 1,013
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Honda CB360T cafe build
So i picked up a complete bike, barn find and matching parts bike. Actually started up after a general inspection. Started chopping it up and ordered some parts already
#2
Junior Member
Join Date: Feb 2012
Location: zebulon, nc.
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 h.o
thats cool.my first street bike when i was 16 was a cb 360 t. mine was red.bought it as running bike for only $150. bucks
#3
Senior Member
Join Date: Apr 2010
Location: PA
Posts: 895
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 6 cylinder
should be a pretty sweet build man....nice to see something a little different then an xj build on here every now and then....ill be following this one!
#5
CF Veteran
Thread Starter
Join Date: May 2010
Location: New Hampshire
Posts: 1,013
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Got a little further with the bike build. The frame has been stripped for the most part and motor out. Ordered my bars, seat and some odds and ends. Cleaned the frame last night. Next is to modify the rear frame to accept the seat/tail section then prep and paint.
I'll be swaping the front forks and clean chrome wheels from a doner bike.
I'll be swaping the front forks and clean chrome wheels from a doner bike.
Last edited by 1ABrian; 05-01-2012 at 04:11 PM.
#6
CF Veteran
Thread Starter
Join Date: May 2010
Location: New Hampshire
Posts: 1,013
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Grand Cherokee
Engine: 4.0
As you can see in the upper pics, the rear frame for the seat pan was to long. I since chopped out a frame section, shortend and welded it together for a nice fit. Welds we're not beautiful but work. Seat fits on frame rails now perfectly. Next is final cleaning and paint the frame.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)