shock mount mod
#1
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Lima Ohio
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
shock mount mod
today for my 96 xj i made these shock mounts today out of the stock ones of my 8.25
i don't have all the steps pictured but its pretty straight forward. this mod will help with the annoying little hang ups on your shock mounts when crawling rocks. it also looks really good to!
You will need a torch or sawzall, or a cut off wheel, a 3" hole saw, and a welder. IF YOUR NOT A GOOD WELDER I WOULD NOT RECOMMEND YOU DO THIS!!!
step 1: Cut the stock mounts of as high up as you can without cutting the u-bolts and the axle
NEXT...
Step 2: Use your 3" hole saw to put the curve of the axle int the mount. test fit on axles before you weld and make sure everything is straight and curves around the tube well.
THEN....
Step 3: Weld and paint the mounts on to the tube and mount your shocks. and your ready to clear some rockz0
i don't have all the steps pictured but its pretty straight forward. this mod will help with the annoying little hang ups on your shock mounts when crawling rocks. it also looks really good to!
You will need a torch or sawzall, or a cut off wheel, a 3" hole saw, and a welder. IF YOUR NOT A GOOD WELDER I WOULD NOT RECOMMEND YOU DO THIS!!!
step 1: Cut the stock mounts of as high up as you can without cutting the u-bolts and the axle
NEXT...
Step 2: Use your 3" hole saw to put the curve of the axle int the mount. test fit on axles before you weld and make sure everything is straight and curves around the tube well.
THEN....
Step 3: Weld and paint the mounts on to the tube and mount your shocks. and your ready to clear some rockz0
Last edited by lolz_jeep; 07-18-2011 at 03:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)