I recently pulled a shot transmission out of a 95 jeep grand cherokee v8 5.2L and was going to swap it with another tranny I got but I don't know what kind of transmission it is. I'm pretty sure the old transmission is a 46RH. I have all the identification numbers off of the transmissions and the measurements. The transmissions measure the same but the transfer case on the old transmission is 5 inches longer. Is it possible to mount the old transfer case onto the new transmission?

Old transmission I.D. number: PK52119171
New transmission I.D. number: PK52119522AC

 

Mine is a 4.0 97 ZJ,what trans do I have ????

 

Old transmission I.D. number: PK 52119171 ==> 46RH which is hydraulically controlled
New transmission I.D. number: PK 52119522AC ==> 44RE which is electronically controlled.

So they are not directly interchangeable. It's possible, but you're looking at a major headache to try to make that swap.

 

What Transmission is in an XJ and ZJ and what Fluid do each of them use???

 

The AW4 used in the XJ needs Dex-III. The ZJ is a Chrysler trans and uses ATF+4 (except the early 93 ZJ which used the same AW4 as the XJ)

 

Thanx Lawsoncl,I wrote it down in my notes.