looking to see if anyone has built a set of trak bars for their zj. im sitting at 5.5/6 in of lift and on stock trak bars right at this moment..... long story how i got to this point but yes trak bars and shocks are my main concern (already sitting on adjustable arms) and trying to see if anyone has built their own bars.... thinking about tackling it

 

dude i'm creepin on you everywhere today haha!

 

I searched the same thing for a couple week man looking for my ZJ sitting at 5.5/6.0.. The few people I found and talked to, it was still pricey how they did it. Extra 70 bucks and had IRO's adjustable shipped to the door instead. Good luck though and I would be interested to see what you come up with if you do build them.

 

what im thinking of doing.... is cutting my bar right in the middle and centering my axle.... attach both ends to their mounts and measuring the difference and from there welding in a piece of rolled steel.....


Thoughts?

 

My thoughts are don't do it. Too much liability if something were to happen.

 

can you spot me 260$ for new adjustable trak bars? lol im just looking for something to help buy me a little more time and help with the drivability of the jeep. im not worried about the weld breaking, ive been welding for quite sometime that im confident with the welds