Wrong Cylinder head bolts for my 93 GC 4.0L?
08-25-2012, 01:31 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Norway
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L I6
Wrong Cylinder head bolts for my 93 GC 4.0L?
Hi, i got this bolts, in the package there was a "manual" with different numberings on the bolts than in my Haynes or in the servicemanual. Could i use this bolts? My bolts today are 2 types, the new bolts are 3 different types, there is two bolts like the one in the middle, where should i place them? I know they are going under the valvecover, but where?
08-14-2019, 03:26 PM
#2
Newbie
Join Date: Aug 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Head Bolts 4.0l
The bolts with the stand off go on the right side of the head. The stand offs are for valve cover gasket alignment. They belong in holes 2 and 6 if you were starting @ the front right of the head going to the back. Also you will see where they live if you look at a valve cover gasket. FEL PRo Gasket # VS50458R
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
02-20-2018 12:06 PM
mkawski
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-07-2016 07:19 PM
Bishop75
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
07-28-2012 06:53 AM
XJEEP01
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-17-2012 10:18 PM
FILO
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
01-18-2012 04:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)