wj budget boost instructions
Thread Starter
Seasoned Member
Joined: Jan 2013
Posts: 433
Likes: 0
wj budget boost instructions
Have 2 inch budget boost spring spacers but no instructions to install them I looked and found one set of instructions. But I was wondering if anyone knows a link to a video how to?
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Did you try searching youtube?
Your front should be the same as a XJ Cherokee, TJ Wrangler, ZJ Grand Cherokee.
Its really simple. Disconnect shocks, trac bar, and sway bar links after setting the rig on jack stands just behind the front lower control arms.
Use a jack to lift one side of the axle under the inner C. As you lift the one side you will see the other side dropping. It should drop enough for you to remove the coil itself. Install the spacer over the bump stop, and add on the bump stop extension. Get the spring back in, and switch to the other side, repeat.
Same basic thing for the rear.
Your front should be the same as a XJ Cherokee, TJ Wrangler, ZJ Grand Cherokee.
Its really simple. Disconnect shocks, trac bar, and sway bar links after setting the rig on jack stands just behind the front lower control arms.
Use a jack to lift one side of the axle under the inner C. As you lift the one side you will see the other side dropping. It should drop enough for you to remove the coil itself. Install the spacer over the bump stop, and add on the bump stop extension. Get the spring back in, and switch to the other side, repeat.
Same basic thing for the rear.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)