Testing HVAC control module
Thread Starter
Newbie
Joined: Nov 2013
Posts: 1
Likes: 0
Model: Cherokee
Testing HVAC control module
I have a 95 GC. By removing the blend door actuator, I can manually move the door so I have heat. How can I test the control module and also test the actuator so see which is defective? The blend door does not move, but I do not believe it is broken since I can move it by hand and get heat.
With the actuator removed and the key on, I tested 5VDC between terminals C40 and D41 at the connector.
I would appreciate some help!
With the actuator removed and the key on, I tested 5VDC between terminals C40 and D41 at the connector.
I would appreciate some help!
Thread
Thread Starter
Forum
Replies
Last Post
DBFinney
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Jun 3, 2024 10:49 PM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 26, 2020 12:59 PM
HappyTrails
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
Sep 14, 2015 08:54 PM
nrwphoto
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 9, 2015 10:41 PM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 3, 2015 09:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)