Sorry it’s the won’t start issues
#1
Newbie
Thread Starter
Join Date: Sep 2018
Location: Telford
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee (ZJ)
Engine: 4.0
Sorry it’s the won’t start issues
Hi all I’m Brian from England I too have the won’t start issue ,
ok issues :
wont fire but will turn over
then instrument panel not working apart from abs light
done:
replaced cam sensor
crank sensor
coil
No power to the coil
ive bypassed the asd and fuel relay by connecting earth direct to battery still nothing then tuck a direct feed from the coil to the battery still won’t start
It’s very frustrating can you help it’s a 4.0 1998 auto 4x4 ZJ
ok issues :
wont fire but will turn over
then instrument panel not working apart from abs light
done:
replaced cam sensor
crank sensor
coil
No power to the coil
ive bypassed the asd and fuel relay by connecting earth direct to battery still nothing then tuck a direct feed from the coil to the battery still won’t start
It’s very frustrating can you help it’s a 4.0 1998 auto 4x4 ZJ
#2
CF Veteran
Have you connected a code scan tool? Does it read anything or maybe not work at all?
#4
CF Veteran
Sometimes if the pcm has gone the code reader won't connect properly, so that would be a useful thing.
No power to the coil..that is interesting. Have you checked the socket of the ASD relay to see if it is energizing?
No power to the coil..that is interesting. Have you checked the socket of the ASD relay to see if it is energizing?
#5
Newbie
Thread Starter
Join Date: Sep 2018
Location: Telford
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee (ZJ)
Engine: 4.0
I’ve connected the live feel from the coil direct to the battery still no spark I’ve tested the new cam and crank sensors they are fine and the smell of fuel too so the injectors must be working although one strange thing happened when I disconnect the earth wires to the fuel and asd relays and connected them to the battery no spark but when i spliced them to the earth side of the coil the dash came back on wth the key out ?
#6
CF Veteran
I recommend downloading the factory service manual for about $7. there is a whole section on no start troubleshooting and how to proceed. You are just shooting in the dark there and you're going to end up ruining something. sorry cant be more help. Welcome to the forum.
#7
Newbie
Thread Starter
Join Date: Sep 2018
Location: Telford
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee (ZJ)
Engine: 4.0
Ok thanks anyway if I come across the issue I will let you know I’m running out of patience it’s been off the road for the past 8 months so short of paying out £800 for a new Ecu I will probably end up scraping it
Thread
Thread Starter
Forum
Replies
Last Post
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
10-25-2014 03:43 PM
txsunrunner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
06-01-2013 04:01 PM
mctod22
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
10-24-2011 06:41 PM
Jeepcraz
Modified XJ Cherokee Tech
8
05-10-2011 09:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)