Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Seats

Thread Tools
 
Search this Thread
 
Old Aug 14, 2015 | 03:36 PM
  #1  
lozo63's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2012
Posts: 82
Likes: 1
From: missouri
Year: 1996
Model: Grand Cherokee
Default Seats

I have a 1996 Grand limited with the leather interior, well the drivers seat has split at the seams and now is torn up. I found a perfect seat out of a 98 at the boneyard they say it will not fit! My question is 96 thru 98 are pretty much interchangleble aren't they? Any one swapped the seats from a 98 into a 96? Thanks
Reply
Old Aug 14, 2015 | 04:51 PM
  #2  
DieselD's Avatar
CF Veteran
 
Joined: Apr 2011
Posts: 4,825
Likes: 2
From: Indianapolis
Year: '99 and '91
Model: Cherokee
Default

I believe the divide is 94-97 and then 98-04, ZJs and then WJs respectively. I know I adapted the seat bases from my 99 XJ to fit 99 WJ seats in there. I believe I can do the same with ZJ seats so in theory you should be able to adapt the 98s seats to your 96. OR you could find some that are direct bolt in, which isn't always easy.
Reply
Old Aug 14, 2015 | 06:03 PM
  #3  
lozo63's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2012
Posts: 82
Likes: 1
From: missouri
Year: 1996
Model: Grand Cherokee
Default

I know its 93 thru 98 and 99 thru 04. I have several ZJ's and Wj's but the guy at the boneyard says 96's have a difference that the others don't. I think it will work but trying to be sure. Thanks for the reply.
Reply
Old Aug 14, 2015 | 06:07 PM
  #4  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

The seat cushion assembly is bolted the the base (whatever it is) with 4 nuts on studs that are welded to the base system tracks. I have 97 XJ seats in my 00 WJ. The bases and floorpans are totally different, but the seat cushion assembly bolted up perfectly. It's a little tricky to stand on your head to change them, so I recommend removing the seat, base and all, then taking them apart. Warning! I had to twist the bolt heads off the floor bolts to get it out of the XJ! I recommend a 13mm flat ratchet or short socket for the nuts. The plastic side panels screwed right on as well.

My WJ is grey cloth so for the final swap, I'm looking for a pair of '97 or earlier ZJ seats for mine. The seats in my WJ tend to pinch the nerves in my hips, so I need the older "flat" cushion design. Of course, black leather would be real nice! The whole seats were $15 each at my local YouPull-YouSave.

Last edited by dave1123; Aug 14, 2015 at 06:16 PM.
Reply
Old Aug 17, 2015 | 09:05 PM
  #5  
94zj318's Avatar
Senior Member
 
Joined: Feb 2012
Posts: 884
Likes: 46
From: Baltimore
Year: 2002
Model: Grand Cherokee
Engine: 4.0L (AMC) Straight Six
Default

They should be interchangeable... a 1993-1995 seat should fit in a 1996-1998, and a 1996-1998 seat should fit in a 1993-1998... in fact all of the parts on the interior, except for the dash, are interchangeable. You could put 1996 door panels in a 1995, for example.
Reply
Old Aug 18, 2015 | 10:54 AM
  #6  
lozo63's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2012
Posts: 82
Likes: 1
From: missouri
Year: 1996
Model: Grand Cherokee
Default

Thanks all got my "new" seat yesterday. Its in perfect shape and out of a 5.9 so a little fancier. Fits perfect.
Reply
Old Aug 19, 2015 | 05:09 AM
  #7  
andrewmp6's Avatar
CF Veteran
 
Joined: Jun 2011
Posts: 8,014
Likes: 17
From: Louisville,KY
Model: Cherokee
Default

If that 5.9 still has the grill in good shape grab that,You can ebay it and make a few bucks or use you yourself also the hood vents if they are there.
Reply
Old Aug 20, 2015 | 03:15 PM
  #8  
lozo63's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2012
Posts: 82
Likes: 1
From: missouri
Year: 1996
Model: Grand Cherokee
Default

If it had more than the seats there would be a lot more newish parts on my 96
Reply
Old Aug 20, 2015 | 09:02 PM
  #9  
caged's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lozo63
the guy at the boneyard says 96's have a difference that the others don't.
he's mixed up. he is thinking xj's, not zj's. a lot of non jeepers refer to grands as cherokee's also. like they don't know there's a difference...
Reply
Old Aug 21, 2015 | 01:43 AM
  #10  
dave1123's Avatar
Old fart with a wrench
 
Joined: Nov 2010
Posts: 14,398
Likes: 740
From: Manlius, east of Syracuse, NY
Year: 2000 XJ Sport & WJ Laredo
Model: Grand Cherokee (WJ)
Engine: 4.0L
Default

How about this one?

"Is it a Cherokee or a full sized one?" A what? I was looking for wiper blades.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Vendor Showcase
1
Jan 4, 2016 01:01 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 2, 2015 08:04 PM
Morris4x4Center
Vendor Showcase
0
Sep 29, 2015 12:21 PM
Rodney Knutson
Cherokee Chat
0
Sep 26, 2015 12:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:58 AM.