removing center link from pitman arm
Thread Starter
CF Veteran
Joined: Apr 2010
Posts: 3,966
Likes: 0
From: knoxville, tn
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
removing center link from pitman arm
my girlfriends wj has gearbox that is leaking fluid... got one from pullapart but the center link was already detached from wheel so I could not get pitman arm off...then I tryed taking the link of the arm but it wouldnt budge....took out the cotter pin and the nut...is there special tool or trick to this... I just need steering box replaced and the center link off...any help is apreesh! thanks
CF Veteran
Joined: Feb 2010
Posts: 12,367
Likes: 23
From: Oroville, CA
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
Whack the side of the pitman arm where the drag link is with a good sized ball peen hammer, or go out and get a pickle fork and drive it between the pitman arm and tie rod end.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Mar 8, 2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)