MSJeeps911

Mounting my trans cooler up. But ran into a problem. Whole front is pushed back so, ill have to straighten it out next week., but were can I mount this oil cooler too?






Sent from my Droid using JeepForum

ol"blue

You can mount it to either the front of the brace or the condenser using the plastic zip tie attaching things that should have came with it, and some strips of rubber under the brace. JMO

MSJeeps911

Its wider than the brace and to mount on.condenssor is hard. I have to first pull the front back (its pusged.back from an accident) out to mount behind the brace.

ol"blue

If mounted to the brace w/rubber strips as cushions and the 4 zip tie things through the condenser it's width doesn't matter and the attachments won't let it move. It doesn't need or have to fit against the condenser.

MSJeeps911

Ok. But one thing the zips that come with.it dont go out the other side. I tried. Needs to.go.through my radiotor too.

MSJeeps911

Found those zip ties. They were in bottom of my box lol. Never looked. Now with the rubber cusions what are they for?

ol"blue

Just strips of thin rubber. They help stop vibration and sliding. You could even use pieces of thin hose split and wrapped around the brace.

MSJeeps911

One more thing. I put the zip tie through the fins correct?

ol"blue

Correct.

MSJeeps911

Thanks man. Just hope the.pastic dosent.smash it up. Gonna have to pull the front support out this week.

MSJeeps911

Well. Ran into problem. The pastic that hold heaights in smashs into the.cooler. I found that the.stock one mounts behind the.A. So, im going to have to try and.pull my.front.member out back to.stock. Hopfully then the cooler can mount behind it.


For me to pull it foawrd.should I.use my com a long? I tried to pry but.can.move it like that.