lift kits
#1
Newbie
Thread Starter
Join Date: Mar 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
lift kits
i have a 95 grand cherokee. i am looking at a 3 1/2 inch lift that reuses front springs in the rear and because my jeep is a V8 it comes with a 3/4 inch spacer for on top of new front springs. this kit says i can run 31 inch tires. i have a couple questions....can i use different spacers on top of the front an rear springs to raise the jeep more for a bigger tire like a 32 or 33? and if i do am i going to run into any problems like driveshaft problems? this kit also comes with a transfer case drop.
#3
CF Veteran
Join Date: Sep 2010
Location: Springville, UT
Posts: 1,649
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Grand Cherokee
Engine: 5.2 V8, Dual cold air, dual batts, E-fan, Sanden OBA
No you shouldn't need a t case drop with 4.5" and below. I ran 6" on short arms without one and I had no vibes. But don't go that high, ya you can put different spacers on top of the coils but I wouldn't recommend going above 2.5". Your also gonna need new track bars if your going above 3" and new shocks, brakelines are fine
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)