jeep stalling problem!!
#16
Old fart with a wrench
If you can wait a few days, try rockauto.com. After 30 orders, I haven't gotten a bad part yet! And you can choose manufacturers. You can also pay for expedited shipping.
#17
I had the same issue(stalling) and I Replaced the PCM ...still had a misfiring issue after that...so I added another ground from the firewall to the block and my jeep has ran great ever since! BTW.... o'reilleys sells faulty parts....I don't care what it is....if it's from o'reilleys....it's broken!!
NAPA all the way
#18
Old fart with a wrench
NAPA's good for most things, but when it comes to sensors, I'd go Mopar. A $50 NAPA oil pressure sensor read 40 lbs and only 40 lbs whenever the motor was running. A $79 Mopar sensor worked properly and has for 45K miles so far. When it comes to solid state sensors, QUALITY of construction is important. My NAPA oil pressure sensor was "hecho en Mexico"
Thread
Thread Starter
Forum
Replies
Last Post
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
07-08-2022 05:17 PM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-22-2015 11:39 AM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)